A) Reboot Terminal
This section has a “Reboot Terminal” button. Once the user clicks on it, the terminal gets reset.
B) Tracking
This section is to set tracking configurations. Input desired values for Sampling Period, Send Period, IO Sampling Period, and IO Send Period and click on “Send to Terminal”.
Note:
- Input values are in “seconds”
- If the entered values are not within defined thresholds, an error is displayed against the parameter
Possible values
|
Sampling Period |
60 to 99999 seconds |
|
Send Period |
60 to 99999 seconds |
|
IO Sampling Period |
60 to 99999 seconds |
|
IO Send Period |
60 to 99999 seconds |
C) Report Transmission
This section has a read-only switch to display On or OFF.
D) Terminal Setting Value Request Command
A button to “Retrieve from Terminal” is provided to retrieve the terminal setting value request from the terminal.
E) RSSI Information
A drop-down to select RSSI type is provided. Select the desired input and click on “Retrieve from Terminal”.
F) Use Geo-fences
This section has a switch to turn the “Use Geo-fences” On or OFF.
Comments
0 comments
Please sign in to leave a comment.